HD Encoder / Decoder Test 2.46
he Thor HD Encoder / Decoder Test is used to validate that Thor Network Encoders are functioning properly on their network interface. The software validates that the units are online and responding to network requests. This software works for all Thor HD Encoders and HD Decoders, as well as Thor SD Encoders and SD Decoders. This system is only for use with Thor Network Encoders and Decoders.
Thor Broadcast provides support for the following types of signal conversions.
Video to fiber-up to 32 Baseband composite video channels over 1 fiber
Ethernet over Fiber-up to 16 individual Ethernet transceivers on the single fiber
DVB ASI to fiber-up to 16 individual MPEG2 or MPEG4 ASI TS over 1 fiber optic line
SDI to fiber-up to 16 individual SMPET259M SD-SDI 270Mb/s signals over 1 fiber
HD-SDI to fiber-up to 16 individual SMPET292M HD-SDI signals over 1 fiber optic cable
HDMI to fiber-HDMI fiber optic transmitter/receiver for up to 3000 feet
QAM to fiber -RF 45-870Mhz over 1 fiber
T1/E1 to fiber-Transport of E1 or T1 carriers DS1 signal over fiber
DS3 to fiber-Transport of T3 DS3 data signals over fiber
AUDIO/VIDEO over IP-Video gateways for transporting video signals over IP
DVB-ASI to IP-Transport of the DVB ASI MPEG TS over IP
IP to ASI-Decoding of MPEG IP streams to video
SDI over IP-Encoding of uncompressed or encoded SDI video through Ethernet networking equipment
IP to SDI-Output of SDI video from a compressed or uncompressed IP Network Transport Stream
E1 or T1 over IP-Transport of the T1 or E1 DS1 Carrier Signal over IP
ASI to QAM-Modulation of Digital Video Broadcast ASI Transport Streams onto a standard digital QAM Channel
HDSDI to QAM-High Definition Modulation of HD SDI signals onto a standard QAM channel
HDMI to QAM-QAM Modulation of HDMI signals that are unprotected by HDCP, please inquire with our engineers
DVB-ASI to HD-SDI-Decoding of DVB ASI Transport Streams
DVB-ASI to SDI-Decoding of DVB ASI Transport Stream
